Free Florida CDL General Knowledge Practice Test 2022

You are looking for actual practice for your coming CDL test? So you have come to the right place. Our FL General Knowledge Practice Test has the same questions as the real exam which is based on the Florida CDL Handbook. Our Florida CDL practice test covers most of the subject areas on the Florida General Knowledge Test such as shifting techniques, railroad crossing safety, drunk driving laws, and much more to make you become a safer driver. In addition, each question has a detailed explanation that will help you understand the concept and answer future questions about it correctly. If you don't get the pass right away, don't worry, you can take this CDL practice test an unlimited number of times to make sure you learn all the questions. Our practice test will refine your driving knowledge so you can earn your CDL and start driving on the roads. Let’s get ready to take our practice test now!

Our CDL practice tests:
Based on 2022 FL commercial driver's license manual
Full answers + detailed explanations
Perfect for first-time, renewal applicants
FL CDL General Knowledge Test format:
50 questions
40 correct answers to pass
80% passing score
List of questions
1.
On what day and time does a 14 hour rule violation occur?
Day 1

Day 2
2.
Any driver convicted of violating an out-of-service order will be disqualified for a minimum of:
3.
All of the following are requirements for dividing vehicles over 33ft except:
4.
In case of a fire, you should pull off the road and do all of the following except:
5.
Which statement is true about extending the 14 hour on duty clock by using the 8 hour sleeper berth provision?
6.
Some general signs that another driver may be distracted include which of the following:
7.
After taking 10 consecutive hours off duty, a driver begins to work at 8:00 a.m. The driver may operate a commercial motor vehicle until what time?
8.
What does the 14 hour on duty limit mean?
9.
Using 6 miles per gallon as your fuel mileage and 8 pounds per gallon for the weight of fuel, how much total fuel weight will you burn off in 600 miles?
10.
Who is responsible for ensuring that the vehicles, anchor points and other securement components are in good working order?
11.
Proper fire prevention should include paying attention to all of these except:
12.
What violations occurred on Day 2 of this example?
Day 1

Day 2
13.
When securing building materials, spacer requirements include all of the following except:
14.
Sliding the 5th wheel will change the weight distribution almost exclusively between which sets of axles?
15.
For safer night time driving, windshields and mirrors should be:
16.
Which of the following is considered on duty time
17.
While exiting the vehicle for a 'look', how many points of contact must you keep with the vehicle at all times?
18.
Load securement for cargo weighing 29,650 lbs must be able to withstand upward force of how many lbs?
19.
What is the maximum weight that can be secured by a tiedown with a marked WLL of 5,000 lbs?
20.
All vehicles or drivers must carry:
21.
The maximum distance from the rear allowed for attaching mechanisms used to secure roll-on/roll-off containers is:
22.
Banding is:
23.
What affect will sliding the trailer tandems forward have on the weight distribution?
24.
In order to drive placarded vehicles, drivers are required to have:
25.
Which of the following require an additional CDL endorsement to drive?
26.
How long should it take oil pressure to come up to normal?
27.
What is a reusable, transportable enclosure that is especially designed with integral locking devices that secure it to a container chassis trailer to facilitate the efficient and bulk shipping and transfer of goods by, or between various modes of transport, such as highway, rail, sea, and air.?
28.
Specific suspension problems that drivers should look for include which of the following:
29.
When making a right turn, all of the following are good technical practices except:
30.
A combination of securing devices which form an assembly that attaches cargo to, or restrains cargo on, a vehicle or trailer, and is attached to anchor point(s) is a:
31.
When confronted with an aggressive driver, you should do all of the following except:
32.
What is a cab shield?
33.
In the following picture, what are axles 2 and 3 commonly referred to as?

34.
In order to perform the in-cab and gauge inspection, which of the following must be done?
35.
When your vehicle is out of gear for more than its length, it will be scored as:
36.
Make sure that splash guards are properly fastened, and not:
37.
Water should never be used to put out a gasoline fire, and also what other kind of fire?
38.
Methods of securing building materials against forward motion include:
39.
Given that general cargo securement requires a WLL of at least 50% of cargo weight, how many 11mm wire rope tiedowns would be required for a load of 26,000 lbs?
40.
When checking the general condition of the vehicle, which of the following should be specifically addressed?
41.
All of the following are true of alcohol except:
42.
A device placed on the exposed edge of an article to distribute tiedown forces over a larger area of cargo than the tiedown itself, to protect the tie-down and/or cargo from damage, and to allow the tiedown to slide freely when being tensioned is a:
43.
HOS regulations were designed to do all of the following except:
44.
A sign of a confused driver who may present a potential hazard is:
45.
What is the minimum number of tiedowns to use on a load 4ft 7in long, and weighing 1,237 lbs?
46.
When securing a single metal coil with eyes vertical:
47.
How long does it typically take a tractor-trailer to cross a single set of railroad tracks?
48.
It is safe to remove the radiator cap or any other part of the pressurized system:
49.
Among other hazards, drivers should be on the lookout for slow or confused drivers, children, accidents, and:
50.
When securing concrete bell pipe in multiple complete tiers, all of the following are true except: