Question:
_________
.Some older vehicles (made before 1975) have a front brake limiting valve and a
control in the cab. The control is usually marked "normal" and "slippery". When you put the control in the "slippery"
position, the limiting valve cuts the "normal" air pressure to the front brakes by half. Limiting valves were used to
reduce the chance of the front wheels skidding on slippery surfaces. However, they actually reduce the stopping
power of the vehicle. Front-wheel braking is good under all conditions. Tests show that front-wheel skids from braking
are not likely even on ice. Make sure the control is in the "normal" position to have normal stopping power.
Many vehicles have automatic front-wheel limiting valves. They reduce the air to the front brakes except when the
brakes are put on very hard (60 psi or more application pressure). These valves cannot be controlled by the driver.
Comments