·This test will prepare you for the internal and external portions of the vehicle inspection exam, where you will be expected to be able to walk around your vehicle, touch items and explain to the examiner why items must be inspected before a trip.

List of questions
1.
These are all gauges that will need checked except?
2.
Fanning the brakes down further after the alarm and buzzer come on should result in the parking brake popping out for a single vehicle, and the parking brake and the trailer air supply popping out for a combination vehicle at?
3.
The 5th wheel has a release arm built into the side of it, it automatically locks the jaws around the kingpin when you connect the vehicles, but it can be pulled out to release the locking jaws for uncoupling. What is the correct position of the release arm when the vehicle is coupled?
4.
When inspecting buses, passenger seat frames should be free from damage and:
5.
Hoses in the engine compartment should be checked for? Select all that apply.
6.
The rest of the axles on the vehicle are nearly the same as the front steer axles, with a few differences. What are the differences?
7.
While fanning down the alarm and light indicating low air pressure should come on at?
8.
Minimum tread depth should be 4/32-inch on:
9.
Brake lines should be checked for?
10.
Air pressure drop on a single vehicle with brakes unapplied should be: