Free Kansas CDL Double/Triple Trailers Practice Test 2022

Do you know how to pair double or triple trailers? If you are planning to take the Kansas CDL double/triple trailer endorsement test, make sure to know it! Our Kansas CDL Practice Test has the same questions as the real exam which is based on the Kansas CDL Manual. It covers most of the subject areas on the Double/Triple Trailers Test such as pulling double and triple trailers, the risk of rollover, managing space, and special considerations when hauling multiple trailers. In addition, each question has a detailed explanation that will help you understand the concept and answer future questions about it correctly. If you don't get the pass right away, you can take this CDL practice test an unlimited number of times to make sure you learn all the questions. Let’s try our Free Kansas CDL Double/Triple Trailers Practice Test today and pass your CDL endorsement exam! Good luck and keep driving safely!

Our CDL practice tests:
Based on 2022 KS commercial driver's license manual
Full answers + detailed explanations
Perfect for first-time, renewal applicants
KS CDL Double/Triple Trailers Test format:
20 questions
16 correct answers to pass
80% passing score
List of questions
1.
What is the purpose of an antilock braking system (ABS)?
2.
An application pressure gauge shows how much air you are applying to the brakes. Increased application pressure to maintain the same speed indicates that __________.
3.
When testing the coupling of the double trailer, the landing gears of the rear trailer should be:
4.
A low pressure warning signal could be __________.
5.
Which of these statements about the handling of doubles and triples is true?
6.
The trailer air supply control should pop out when the air pressure falls into the pressure range of:
7.
How should the air leakage rate be tested?
8.
During a normal drive, the spring brakes are held back by _____.
9.
What distinguishes a wedge brake from other types of brakes?
10.
When driving doubles or triples, for safer handling which trailer should be at the rear?
11.
Vehicles without automatic air tank drains need to be checked manually to remove ________?
12.
Why should the air hoses connected to the brake chambers be checked?
13.
To apply the parking brakes, you should _______.
14.
A safe speed on a curve for a smaller commercial vehicle:
15.
When performing the controlled braking method for an emergency stop, you are _________.
16.
You are doing a walk around inspection of a double or triple trailer rig. You should be sure the converter dolly air tank drain valves are _____ and the pintle hook is _________.
17.
Where are the brake drums located?
18.
To position the converter dolly over short distances you can:
19.
The pintle hook should never be unlocked when:
20.
A converter dolly is used: