·This test will prepare you for the internal and external portions of the vehicle inspection exam, where you will be expected to be able to walk around your vehicle, touch items and explain to the examiner why items must be inspected before a trip.

List of questions
1.
To inspect the Apron/Kingpin/Gap area, all of the following apply except:
2.
As part of your suspension inspection, you will check for cracks, leaks, or damage to all of the following except:
3.
Most 5th wheels are adjustable for weight distribution and turn clearance, these are called sliding 5th wheels, they have a release area that needs to be completely in and locked, and a locking mechanism. What locks the 5th wheel in place?
4.
Fanning the brakes down further after the alarm and buzzer come on should result in the parking brake popping out for a single vehicle, and the parking brake and the trailer air supply popping out for a combination vehicle at?
5.
The 5th wheel has a release arm built into the side of it, it automatically locks the jaws around the kingpin when you connect the vehicles, but it can be pulled out to release the locking jaws for uncoupling. What is the correct position of the release arm when the vehicle is coupled?
6.
The fuel and air tanks are checked for the same items except?
7.
Tire tread depth depends on the axle. The depth should be no less than ______ for the steer axle, and _____ for any other axle.
8.
To test air leakage the air valves should be?
9.
If a trailer is equipped with a cargo lift, drivers should do all of the following except:
10.
At the rear of the tractor there are still a few things to check, what are they?