Free Florida CDL General Knowledge Practice Test 2022

You are looking for actual practice for your coming CDL test? So you have come to the right place. Our FL General Knowledge Practice Test has the same questions as the real exam which is based on the Florida CDL Handbook. Our Florida CDL practice test covers most of the subject areas on the Florida General Knowledge Test such as shifting techniques, railroad crossing safety, drunk driving laws, and much more to make you become a safer driver. In addition, each question has a detailed explanation that will help you understand the concept and answer future questions about it correctly. If you don't get the pass right away, don't worry, you can take this CDL practice test an unlimited number of times to make sure you learn all the questions. Our practice test will refine your driving knowledge so you can earn your CDL and start driving on the roads. Let’s get ready to take our practice test now!

Our CDL practice tests:
Based on 2022 FL commercial driver's license manual
Full answers + detailed explanations
Perfect for first-time, renewal applicants
FL CDL General Knowledge Test format:
50 questions
40 correct answers to pass
80% passing score
List of questions
1.
What is the best way to prevent brake failure on long downgrades?
2.
Which day below contains at least 1 violation?
Day 1

Day 2
3.
Which violation occurs on the below example?
4.
There are three maximum limits you must follow at all times. Those limits are:
5.
Escape ramps on downgrades:
6.
Concrete pipe loaded crosswise generally:
7.
When should drivers inspect their vehicles?
8.
The maximum weight limit on a single axle is:
9.
When loaded cement pipe over 45 inches in diameter, which pipes should be blocked, wedged, or otherwise immobilized?
10.
A single metal coil with eye vertical weighing 6,350 lbs requires tiedowns with a minimum aggregate WLL of:
11.
If you jam on the brakes and the wheels lock up and skid:
12.
In cargo securement, a wedge is defined as:
13.
Which statement below is true?
14.
The principal way of controlling speed on downgrades is:
15.
What is the main factor affecting the low-speed offtracking of a tractor trailer?
16.
The Aggregate Working Load Limit should, at minimum, be:
17.
The responsibility for repairing items noted on the pre-trip report that affect safety belongs to:
18.
Another name for 'skid', a platform or tray on which cargo is placed so that it can be handled as an article.
19.
If you are driving while sleepy, the safest remedy is:
20.
How many violations occur on the below example?
Day 1

Day 2
21.
Which of the following is not an acceptable method of containing loose parts when securing flattened or crushed vehicles?
22.
If you cannot see the driver of a vehicle, then:
23.
Using the following numbers for your calculations, how much weight will come off your steer axle?


Miles per gallon: 7
Miles travelled: 280
Percenatage of fuel weight on steer axle: 80%
24.
What is the minimum securement requirement for paper rolls with eyes vertical with a width between 1.25 and 1.76 its diameter?
25.
When securing a non-cubic boulder with an unstable base, the four surrounding chains must have a WLL of at least:
26.
What types of freight need to be secured properly?
27.
What violation has occurred at 10:00 a.m. on Day 2?
Day 1

Day 2
28.
When loading paper rolls with eyes horizontal, which of the following is not a requirement for stacking a second layer?
29.
What is the minimum allowable tread depth for every groove on the front tires?
30.
An anchor point is defined as:
31.
'Blocking' is defined as:
32.
Cargo securement for a load weighing 37,000 lbs must be able to withstand a minimum forward braking force of:
33.
Who is responsible for inspecting securing devices and cargo within the first 50 miles?
34.
If unsure of the exact location of the center of gravity of your cargo, where would you rather have the center of gravity located if you couldn't get it centered?
35.
To protect the area after an accident, steps you should take include:
36.
A 'hook-lift container' is:
37.
Which of the following are covered by the specific log securement requirements?
38.
How many anchor points should be used to secure an intermodal container on a chassis vehicle?
39.
When securing metal coils, it is acceptable to use nailed blocking or cleats as the sole means to secure:
40.
When backing, all of the following are important safety rules:
41.
What is the correct method of determining what percentage of fuel is distributed between the steer axle and the drive axles?
42.
A good inspection habit is for the driver to re-inspect the cargo:
43.
Which of the following is considered off duty time?
44.
How many reflective triangles are required to be kept as part of a trucks emergency equipment?
45.
Some causes of fuel fires include improper fueling, driver smoking, and:
46.
Using the following numbers, what would be the final result if you moved the 5th wheel forward two holes?

steer axle: 10,800 pounds
drive axles: 34,100 pounds
Weight transfer: 500 pounds per hole
47.
You receive a scale ticket and your drive axles are 35,400 and your trailer tandems are 31,100. Based upon the two most common tandem slider rail hole spacings, what is the minimum number of holes you would have to slide the tandems to get the weight legal, and in which direction?
48.
Posted heights at overpasses:
49.
When driving downhill, you should use the service brakes:
50.
When securing paper rolls with eyes vertical in a sided vehicle all of the following are acceptable except: